Toll Free in N.A.: 1.888.822.2024

Home Online Catalog Saf-T-Bar Series Information Request


Series H

For heavy duty cranes and monorails and port authority equipment


The advanced Saf-T-Bar system reflects the basic engineering concept of an integral insulated conductor which provides years of safe, economical trouble-free service. It is designed for compact, low cost installation and minimum maintenance.
The Series H conductor can be mounted in any plane. In wet atmospheres the system should be mounted on spool insulators with the conductor in the downturn position. In dirty and dusty atmospheres mount the conductor in the downturn position. If the atmosphere is likely to cause electrical oversurface tracking, choose the spool type hanger clamps rather than the standard coated hanger clamp. A Lexan slide-on insulating hanger is available to replace coated or spool type hangers. Conductors are supported on brackets on 10 ft. centers for all crane conductor positions.
Series H conductors are supplied in 20 ft. lengths assembled complete with insulating covers. Other lengths are available. Joint fittings and covers are to be ordered separately.


Series H SAF-T-BAR Features

  1. Metal Guideways assure positive tracking of collector shoe. Collector tracks with or without insulating cover

  2. Flat Contact Surface for long conductor wear, a stainless steel channel insert providing corrosion resistance and resistance to electrical pitting

  3. Contact Shoe with flat contact surface of sintered copper and graphite, self-lubricating for effective draw of current to the collector

  4. Skin Tight Insulation funs cooler, will not deform under clamp pressure. Standard insulation is 160°F

  5. Conductors mount in vertical or horizontal position without special parts or fittings

  6. Collectors are available in either single, dual head or heat sink construction

  7. New Hand Safe Designs available

  8. Bolted Joint Construction provides a continuous rigid conductor


Need more detailed information regarding Saf-T-Bar's Series H ?




When high amperage and/or maximum mechanical stability
is required, specify Series H Saf-T-Bar